Reviewed Printing- Press Operations Options
Options below have reviewed by pollution prevention specialists. They are commonly recommended and implemented
for facilities. |
|
Substitute Diaphragm Pumps for Mechanical Vane Pum |
To reduce ink vaporization as diaphragm pumps to not need to heat ink as much as mechanical vane pumps do. |
|
Recycle waste solvents |
Segregating solvents might afford reuse (for equipment cleaning or ink thinning)for either on-site or off-site |
|
Use Alternative Ink and Cleaning Products |
Use Alternative Ink and Cleaning Products with reduced VOC emissions from printing and press clean up
Substitute solvent based inks with vegetable oil or water based inks where applicable. Use low VOC or VOC-free cleaning solutions. A new printing system that features an oil-based lithographic ink that can be converted to a water-soluble state is currently available, allowing a water-based blanket wash to be used.
|
|
Install automatic ink levelers |
These will help to keep ink conditions optimal. |
|
Use automatic cleaning equipment |
Automatic cleaning equipment can often be retrofitted to existing processes and operations. Typically, lower volumes of cleaning formulations are applied with such cleaning equipment, air contact, and thus volatilization, is reduced, and most are designed to include recycling and reuse of cleaning solutions |
|
Minimizing finished product rejects by automating |
Minimizing finished product rejects by automating (non-contact) monitoring technologies which detect tears in web and press performance |
|
Use fountain coolers |
Using fountain coolers to reduce evaporation from the dampening fountain
|