Following are a set of P2 options you may wish to implement. No option is perfect for everyone, but sometimes options that have worked at one facility can work at yours. They might also serve as inspiration. |
Reviewed Solvents OptionsOptions below have reviewed by pollution prevention specialists. They are commonly recommended and implemented for facilities. |
|
Closed containers for waste | |
Store solvent waste in closed containers. | |
Ensure adequate containment | |
Ensure adequate secondary containment around solvent storage, and inspect regularly. | |
Use proper container labeling | |
Containers must be labeled with: proper chemical name(s) of contents; principal hazards; orange warning symbols and safety phrases | |
Flushing parts | |
Flush parts in freeboard area. | |
Minimize solvent pooling | |
Minimize the pooling of solvent on and in parts. | |
Correctly fill machine for cold cleaning | |
When batch cold cleaning, do not fill machine above fill line. | |
Spills - clean up | |
Clean up spills immediately. | |
Keep wipe rags contained | |
Store wipe rags in closed containers. | |
Avoid splashing | |
Do not agitate solvent to the point of causing splashing. | |
Control room drafts | |
When cover is open, control room drafts. | |
Avoid cleaning absorbent material | |
Do not clean absorbent materials. |
Find Options for other processes