Following are a set of P2 options you may wish to implement. No option is perfect for everyone, but sometimes options that have worked at one facility can work at yours. They might also serve as inspiration.

Reviewed Printshops - Spill Control Options

Options below have reviewed by pollution prevention specialists. They are commonly recommended and implemented for facilities.
 
Berm working areas with curbing
Berm working areas with curbing, similar to a concrete dike, so that spills can be easily contained for cleanup.
 
Manage placement of containers
Place storage containers in a convenient and safe place. Try to avoid moving waste long distances.
 
Use shop rags
Use shop rags for small spills and absorbent for larger spills. Absorbents should be easily accessible anywhere in the shop and may require disposal as hazardous waste, if saturated.
 
Use drain mats or plugs
Use drain mats or plugs to prevent spilled fluids from entering sanitary or storm drains, plus to help contain spilled fluids for cleanup. If possible, seal or remove unused floor drains to prevent accidental discharge to the sewer system.
 
Use drip pans
Place drip pans or absorbent mats under leaking equipment or where spills are likely to occur.




Find Options for other processes
image
/themes/hazel/demo7/wp-content/themes/hazel/
/themes/hazel/demo7/
#d8d8d8
style1
paged
No more posts to load.
Load More Posts
Loading posts...
/home2/treethemes/public_html/themes/hazel/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
on
off