Zero Waste Logo The Zero Wate Network the University of Texas at Arlington Center for Environmental Excellence Environmental Training Institute Logo  

Join Us on:

Social Network Nav Bar

Lean and P2 Workshops

Houston
Nov, 14-16, 2017,

Arlington
Dec. 5-7, 2017

 

More...

 

Environmental Management Systems Workshops

Lake Charles
Sep. 26-29, 2017

Arlington
Dec. 12-15, 2017

 

More...

Reviewed P2 Options
for the
Coating-Surface Preparation Process

Following are a set of P2 options you may wish to implement. No option is perfect for everyone, but sometimes options that have worked at one facility can work at yours. They might also serve as inspiration.

Reviewed Coating-Surface Preparation Options

Following are a list of options that have been reviewed by pollution prevention specialists. These options have worked at other facilities and may work at yours.

 

Nonhazardous parts cleaners

If you are cleaning a part prior to coating it, you might be able to use a nonhazardous parts cleaner. Keep in mind, however, that any parts washing media may ultimately become hazardous due to contaminants picked up from the parts themselves. Whether this happens depends on many factors including: the type of parts being washed, the type of washing medium, and how often the medium is changed. The rate at which material needs to be replaced or becomes hazardous will also depend on whether the parts washers are equipped with self-filtering units that extend the solvent lifetime.
 

Plastic media blasting

If you are using sand or another abrasive blasting media, consider switching to a recyclable media like plastic beads. It is gentler than abrasive sand blast systems and will not damage the underlying metal.
 

Sodium bicarbonate blasting

The system can replace some harsh chemical processes, be used within delicate environments, and be used on some components that have previously been impossible to clean. After all paint particles or other potentially hazardous materials are filtered out, sodium bicarbonate waste can be discharged to a floor drain that is connected to a conventional wastewater treatment system.
 

Dry ice (carbon dioxide) blasting

A dry ice system quickly removes paint and other surface coatings without damaging the item being cleaned and eliminates the use of hazardous solvents. Although it is expensive, dry ice blasting can replace many harsh chemical processes, be used on delicate components, and be used on some equipment that have previously been difficult or impossible to clean.
 

Install a Proportioner

Install a proportioner on the spray equipment for plural component coatings such as epoxies and polyurethanes. The proportioner mixes the paint as it is used; therefore, waste associated with unused paint may be reduced.



Find Options for other processes



SHEP Shield
Safety
Health and
Environmental
Professional



ERP Shield
Environmental
Regulatory
Professional



ESP Shield
Environmental
Science
Professional



EMP Shield
Environmental
Management
Professional

Attend a workshop and
earn credits toward a
Professional Certification

 

 



The Zero Waste Network is one of eight Pollution Prevention Resource Exchange P2RxCenters , serving as a national network of regional information centers: NEWMOA (Northeast), WRRC (Southeast), GLRPPR (Great Lakes), ZeroWasteNet (Southwest), P2RIC (Plains), Peaks to Prairies (Mountain), WSPPN (Pacific Southwest), PPRC (Northwest). We are a proud member of the National Pollution Prevention Roundtable.

National P2 Roundtable Logo