Following are a set of P2 options you may wish to implement. No option is perfect for everyone, but sometimes options that have worked at one facility can work at yours. They might also serve as inspiration.


Unreviewed Options, Use with CautionUnreviewed Chemical Manufacturing reboiler Options

Options below have not been reviewed by pollution prevention specialists. They are commonly recommended and implemented for facilities.
 
Reduce Fouling Potential
Rag formation in the wash train and corrosion products contribute to fouling of Reboiler in the EDC process area. To minimize this fouling, the EDC concentration of the Heavy Ends is maintained at elevated levels. Use of a static mixer in the wash system and changing from ammonia to caustic for pH control in the C-210 and C-2210 columns have the potential to reduce this fouling. If the fouling potential is reduced, the concentration of EDC in the Heavy Ends can be reduced which will reduce the amount of Heavy ends generated. These changes would also reduce the cleaning frequency of the Reboiler, which would reduce the amount of reboiler scale generated. The heavy ends and reboiler scale are both hazardous wastes, which must be incinerated and disposed. This project has been determined to be economically and technically feasible



Find Options for other processes
image
/themes/hazel/demo7/wp-content/themes/hazel/
/themes/hazel/demo7/
#d8d8d8
style1
paged
No more posts to load.
Load More Posts
Loading posts...
/home2/treethemes/public_html/themes/hazel/
#
on
none
loading
#
Sort Gallery
on
yes
yes
off
on
off